Isp-technologies SM 800 Bedienungsanleitung PDF herunterladen (Seite 6)

CAT6 Connections

The figure below shows the connections for each output A, B and C of each zone output

on the Master Control Module and also connections between each HDDS SM800

speaker. Connections are done via standard CAT6 cables where pins 1 through 8 are

connected common to the same pins 1 through 8 at each end. As shown below two

wires in the Cable are used for balanced audio and 6 wires are used for power with two

providing ground and two for each of two 22VAC power signals fed down the cable.

The HDDS SM800 is a wall mountable Speaker The SM800 works excellently for

foreground and background music plus music-plus-paging systems. Low frequency

output can be augmented with the addition of the HDDS SB112subwoofer. The SM800

loudspeaker is packaged with a bracket for easy wall mounting.

Mounting the HDDS SM800

Refer installation to a qualified installer to ensure proper mounting to overhead

structures. The HDDS SM800 includes a wall mounting bracket for easy install. The

HDDS SM800 weighs 14.5 lbs, make sure to use mounting hardware in accordance with

local safety standards for suspending 14.5 lbs.

1 2 3 4 5 6 7 8

Keine Kommentare

Isp-technologies SM 800 Bedienungsanleitung Seite 6